We have some really great 'techy' type guys here who are, as they have been exploring the FD mechanics and sharing that in their posts, writing what is turning out to be a 'troubleshooting manual' for us less capable folks.

After a few years of research, I finally decided to purchase a freeze dryer. It was one of the best purchases I have ever made. The only regret I have is that I didn’t buy one sooner.

I have no adverse vacuum performance change with the catch can in place. It just catches any oil. I still smell oil vapor when the pump first starts up, but not nearly as much. I've only emptied the can once or twice since I've had it installed. I slightly over filled the pump and it blew out into the can, then ran it with the FDer valve open for a few minutes. Nothing got past the can. I used the outside port as IN and the middle one as out. I did take the port off and the longer one should be the inlet port. It's not a great deal longer. Tony Edited January 22, 2016 by TonyC updated (log)

Over night the FDer warmed up and the next morning we had a massive puddle under it - running off the counter onto the floor. I cleaned up the mess, but the next day the puddle was even bigger. On the 3rd day it was back again just as large even though I left a large towel under the FDer.

If you have a high volume lab, it’s usually a good idea to have more than one to be safe. Freeze drying ice water hash is the #1 way to dry it because it increases your production speed, enhances its color, retains more delicate terpenes, and sharply limits microbial activity.

22F, achieved by dividing 9 hours by 110F (the difference in food temps). We both know that the FDer doesn't do linear as the temps fall faster early on and slowly peak to max low temps, but the food freeze time might be a tad more linear than the FDer as food is denser and must be frozen throughout.

We also like to freeze dry gluten-free sweet breads and muffins. Slice bread or muffins and freeze dry it. Then to reconstitute, simply wrap it in a wet paper towel and leave it in the fridge overnight or put it in the microwave for up to 30 seconds.

The unit can also connect to and communicate the freeze dryer cycle more info data to a nearby PC through an ethernet cable.

Collaborating with smart freeze-dry machinery manufacturers can greatly increase production reliability. Businesses must also focus on equipment servicing, spare parts, and post-sale assistance for the freeze dryer. The system will reduce downtime and maximize efficiency when properly maintained.

“Astronaut” ice cream is a fun treat to make and is so easy. Just scoop ice cream onto the trays and freeze before processing.

Not only does it spread the cost, but it can also increase the amount and variety of the preserved food you store away. Additionally, a group purchase can also lead to purchasing bulk quantities of food to freeze dry.

Granted, most of that time is the freeze dryer doing all the work, but the process is not without effort. Once the food is ready it must be put into appropriate containers with oxygen absorbers and sealed properly so they can last.

Affiliate marketers: We’re reader-supported. When you purchase as a result of hyperlinks on our web page, we may perhaps get paid an affiliate commission

The system records and maintains a log of the pressure and temperature during all parts of the freeze-dry cycle.